Avid HD OMNI Preamp, I/O, and Monitoring Pro Tools HD Series Interface - Manual (Page 24)

HD OMNI Guide 20
Pro Tools|HD Native Systems
You can use up to eight channels of analog and digital I/O with HD OMNI connected to a
Pro Tools|HD Native card using a DigiLink Mini cable.
To connect HD OMNI to a Pro Tools|HD Native card, do one of the following:
„ Connect HD OMNI Primary Port to DigiLink Mini Port 1 on the Pro Tools|HD Native card with a Di-
giLink Mini cable (included with your Pro Tools|HD Native system).
– or –
„ Connect HD OMNI Primary Port to the Expansion port on a primary Pro Tools|HD audio interface
with a DigiLink Mini cable (HD I/O).
To connect multiple HD audio interfaces to a Pro Tools|HD Native system:
1 Connect the Primary Port of the first HD audio interface to the DigiLink Mini Port 1 on the
Pro Tools|HD Native card with the included DigiLink Mini cable.
2 Do one of the following:
• Connect the Primary Port of the second HD audio interface to the Expansion Port on the first HD
audio interface with the included 18-inch DigiLink Mini cable.
– or –
• Connect the Primary Port of the second HD audio interface to the DigiLink Mini Port 2 on the
Pro Tools|HD Native card with the included DigiLink Mini cable.
3 Make the necessary Loop Sync connections.
Figure 3. HD OMNI connected to the DigiLink Mini Port 1 on a Pro Tools|HD Native card (8-channel system)
Pro Tools HD supports only one HD OMNI per system.
POR
T 1
POR
T 2
12-foot DigiLink Mini
cable
Pro Tools|HD Native card