Output – Avid HD OMNI Preamp, I/O, and Monitoring Pro Tools HD Series Interface User Manual
Page 44
HD OMNI Guide
40
To assign HD OMNI physical inputs to Pro Tools
Input paths, do one of the following:
On the Input page of the I/O Setup dialog
(
Setup > I/O
), select the physical inputs from the
Input selector.
– or –
On the Main page of the Hardware Setup dia-
log (
Setup > Hardware
), select from the available
physical inputs for each of the eight
Input
chan-
Output
The Output page of the I/O Setup for HD OMNI
lets you configure output signal path names and
formats. You can have overlapping Output
paths. Output names, channel formats, and
physical output mappings are saved with the
system.
The Output page of the I/O Setup displays the
MAIN and ALT HD OMNI monitoring paths as
“Monitor” and also provides a dedicated Cue
output path (to the Headphone jack on the
front panel of HD OMNI).
Depending on whether or not monitoring paths
are assigned in the Monitor page of the Hard-
ware Setup dialog, not all physical outputs may
be available from the Output selector in the Out-
put page of the I/O setup. The selected physical
output ports in the I/O Setup are linked to the
eight channels of physical outputs selected for
Output
in the Main page of the Hardware Setup.
If you change the setting on one dialog, it auto-
matically updates in the other.
Assigning Pro Tools Input channel paths to HD OMNI
physical inputs in the I/O Setup
Input selector
I/O Setup, Output page