MOVE'N SEE Personal Auto-Follow System - Manual (Page 9)

9
Setting up the beacons
The watch is located by the beacons thanks to triangulation techniques which is why the beacons are essential both
INDOOR and OUTDOOR.
After screwing the beacons on the mini-tripods, switch ON each beacon by pressing its button until the green light
turns ON.
Place the PIXIO robot and the 3 beacons around the area you want to film following these instructions:
- Place the beacon n°1 as far as possible from the robot (but not more than 330ft or 100m). It will
improve the left-right accuracy of the tracking (beacon numbers are written at the back of each beacon).
- Place the beacons n°2 on the left of the beacon n°1, as seen from the robot .
- The beacon n°3 can be placed on the left or on the right of other beacons.
2
3
1
The beacon n°2 is on the
left of the beacon n°1, as
seen from the robot
The beacon n°1 is placed
as far as possible from the
robot
2
3
1