MOVE'N SEE Personal Auto-Follow System - Manual (Page 30)

30
Installing a new firmware version on your PIXIO
Firmware v2.9 is already installed on your PIXIO. To take advantage of
the latest improvements, install any new firmware version available from:
https://shop.movensee.com/ccc
We recommend to upgrade all devices (the robot, the watch and the 3
beacons) at the same time. Make sure that all devices are fully charged
before starting the procedure.
1. Download the last firmware version
Download the latest firmware version at https://shop.movensee.com/ccc
Save the firmware on a micro-SD card formatted with the FAT32, FAT16 or FAT12
format (usually, micro-SD cards with a capacity lower than 32Gb are formatted
with a correct format) . The file must be saved in the root directory of the
memory card, not in a sub-directory. This file is meant to be opened directly
on and by PIXIO (do not try to open it from your computer).
Check that the name of the file is update.mnp without any ...(1) or ...(2) at the end of
the name.
Insert the micro-SD card in the robot slot on the robot side.
Need some help to upgrade your PIXIO ?
Have a look at the tutorial video:
https://youtu.be/CxnVju8qysw
The micro SD
card goes into
the robot slot