MOVE'N SEE Personal Auto-Follow System User Manual
Page 43
43
ZOOM / REC
PROBLEM
CAUSE
SOLUTION
The REC stops automatically.
You are asking for recording with the REC
button on the camera.
The PIXIO is not designed to operate by pressing
on the REC button on the camera.
To start and / or stop recording the video, use
the button on the watch or use the PIXIO_
Remote application from a tablet or a phone.
RECHARGE
PROBLEM
CAUSE
SOLUTION
The watch does not recharge (the red LED is
OFF)
The watch battery is already charged
or
The watch is not properly placed on the
charger
1. Check that the watch is not already charged.
2. Check that the watch is positioned on the
right side of the charge (the side without
marks).
3. Check that the watch is in direct contact
with the charger.
The robot or a beacon does not recharge (the
red LED is OFF)
The battery device is already charged
Check that the device is not already charged
(the red LED does not turn ON if the battery is
charged).
The robot discharges when OFF
The robot is self-discharging
To avoid self-discharge of the robot : unplug
the robot after the end of the robot charge,
turn the robot ON few seconds and then turn it
OFF before store it.