MOVE'N SEE Personal Auto-Follow System - Manual (Page 19)

19
How to increase the autonomy
1. Use powerbanks
Beacons and robot are designed to be powered while using. You can plug power
banks to the robot and the beacons to increase the autonomy of your PIXIO. A
powerbank with a capacity of 3000mAh will extend the autonomy by 4 or 5h.
2. Use the mains outlets
You can plug the PIXIO robot and the beacons to the sockets. This is useful to film longer, and to install your
system in a fixed position.
> For the beacons, use 3 micro-USB
chargers 5V DC, 700 mA min.
> For the PIXIO robot, use a micro-
USB charger 5V DC, 2A min (or the
one which is provided). Power 5V DC,
2A min
(e.g. the one
provided)
Power 5V DC,
700mA min
(not provided)