Multi robot tracking – MOVE'N SEE Personal Auto-Follow System User Manual

Page 27

Multi robot tracking

All devices must be paired together to be able to run into the MULTI-USER mode (see the «Pairing procedure:

Each robot must point at the beacon n°1 before turning ON the first watch and starting the tracking.

Turn ON each beacon by pressing the

button until the

green

light turns ON.

Place the PIXIO robot and the 3 beacons around the area you want to film,

in such a way that beacon n°2

is on the left of the beacon n°1, as seen from the master robot.

The beacon n°3 can be placed on the left

or on the right of other beacons. The distance between the beacons, and the distance between the robot

and the beacons, must be smaller than 330ft (100m).

Slave

robot

Beacon n°1

Beacon n°2

Beacon n°3

Seen from the master

robot, the beacon

n°2 must be on

the left side of the

beacon n°1.

Master

robot

The distance between each

device must be smaller than

330ft (100m)