MOVE'N SEE Personal Auto-Follow System - Manual (Page 10)

10
The PIXIO robot can also be placed at the middle of the 3 beacons.
The positions of the beacons are very flexible, but tracking and accuracy are better with
proper configurations:
• Check that there are direct lines of sight between the beacons, and between the robot
and each beacon. Or at least check that any obstacle is small.
• Keep the robot, the beacons, and the watch at more than 20-30 cm (10 inches) from
the walls or from massive metallic parts. Avoid operating near a big electrical transformer,
powerful antenna, etc.
• The best height for the beacons is 1 to 2m (3 to 6 ft) from the ground. The three beacons
need to be on the same level and perpendicular to the ground.
• The distance between the beacons, and the distance between the robot and the
beacons, must be smaller than 330ft (100m).
3
2
The beacon n°2 is
on the left of the
beacon n°1, as seen
from the robot
1
The beacon n°1 is placed
as far as possible from the
robot
Optimal
orientation
Bad orientation
CORRECT INCORRECT