MOVE'N SEE Personal Auto-Follow System - Manual (Page 38)

38
More information about PIXIO batteries
The robot, the watch and the three beacons include a Lithium-Ion battery you need to charge before
starting to use PIXIO. The devices need about 2 hours to be fully charged if completely unloaded. Once
charged, the robot is able to run for more than three hours. The watch and the beacons batteries can run
between 2 and 3 hours and a half.
1. Battery charge capacity tends to decrease over time and use.
2. Lithium-ion batteries typically have a lifespan of between 300 to 500 charge cycles and are expected to
retain around 80% of their original battery capacity after 300 charge cycles, or after about one year of use.
3. High or low ambient temperatures may negatively affect battery performance, resulting in a loss of up to
70% of charge capacity. The batteries should be stored at a temperature between 10° to 30°C.
4. If you do not use your PIXIO for an extended period, the batteries should be charged between 40% to 60%
every two months.
5. To avoid self-discharge of the robot, unplug the robot after the end of the robot charge, turn the robot
ON for a few seconds and then turn it OFF before storing it.
Normal drop in battery capacity over time and use in not covered by the warranty