Multi-user operation, Multi watches tracking – MOVE'N SEE Personal Auto-Follow System User Manual

Page 26

MULTI-USER operation

Multi watches tracking

All devices must be paired together to be able to run into the MULTI-USER mode (see the «Pairing procedure:

Turn OFF all watches. Follow the PIXIO set up procedure, until the beginning of the tracking (page 8). The

PIXIO robot starts to track the first watch ON.

Once the tracking begins, turn ON the additional watches by pressing the

button. The

green

light of

each watch starts to blink. The blinking is slow if there is no remote control connected to the device.

The robot will film the last watch turned on. You can switch from one watch to

another using Pixio Remote Control app. on your phone while filming (see page 14).

If there is no remote control connected, press the

button of a watch to be tracked and filmed. The

light is

full green

when the watch is filmed. Stop recording by pressing the

button again. The

green

light

flashes when the camera is not recording.

Light OFF,

watch OFF

Blinking light,

watch ON / record OFF

Light ON,

Watch ON

Record ON