Pairing procedure: pair your devices (robots, Watches and beacons), Start your pixio robot into the pairing mode – MOVE'N SEE Personal Auto-Follow System User Manual

Page 24

Start your PIXIO robot into the pairing mode

Check that all devices (robots, watches and beacons) are OFF.

Press and hold the

zoom

button on the

master

robot, then press briefly

Release the

zoom

button when the

green

and

red

lights blink together.

The

master

robot enters into the pairing mode and the green light flashes twice

intermittently . Do not turn OFF the

master

before pairing all devices.

You must pair at least one watch and 3 beacons to the

master

You can add up to 15 additional robots (slaves) and film up to 16 people.

Pairing procedure: pair your devices (robots, watches and

beacons)

- if you have a single robot and several watches, your robot will become the

master

- if you have several robots, you have to choose one to become the

master

While filming, the

master

robot should always be ON. The master collects data from the other devices to

run MULTI-USER mode.

1. Press on hold

ZoomIN button

3. Release ZoomIN

button when the

green and red lights

blink together

2. Briefly press POWER