MOVE'N SEE Personal Auto-Follow System - Manual (Page 25)

25
2. Pair a device (robot, watch or beacon) to the master
The master robot must be running in pairing mode to pair a new device (see the previous paragraph).
To pair a new device (slave robot, watch or beacon), start the device closer than 1 meter (3 ft) from the
master ro bot. The green light of the device blinks 4 times intermittently once the pairing is completed.
You must restart all the devices before starting the tracking.
The pairing is saved for future use.
3. How to recognize a slave robot and a master robot ?
During ignition (before the start of the tracking), the green and red lights of a slave robot blink alternately.
Only the green light blinks on a maste r robot.
You must pair at least one watch and 3 beacons to the master before starting the tracking.
NOTICE