Hensel Expert D 250 SPEED Monolight - Manual (Page 70)

User Manual Expert D 250 Speed / D 500 / D 1000
70 HENSEL-VISIT GmbH & Co. KG
Replace the Halogen Lamp for Modeling
Light
CAUTION Risk of burns from reflector and flash unit
Heat which may cause burns develops at the head
during the flash process.
 Before removing the reflector allow reflector
and flash unit to cool-off.
 Allow flash unit to cool off.
CAUTION Glass safety dome may get damaged
When mounting a reflector the glass safety dome can
be damaged.
 Do not touch the glass safety dome with the
reflector.
 While mounting a reflector place the flash unit
on a stand.
 Place the reflector evenly on the flash unit.
 When mounting a reflector hold it with one
hand.
CAUTION The halogen lamp or flash tube can burst due to oily
residues on the glass parts.
Avoid touching the flash tube with bare hands to
prevent its contamination with oily residue.
 Use cotton gloves to change the halogen lamp
or the flash tube.
 Carefully clean after touching the glass parts.