Inserting halogen lamp for modeling light – Hensel Expert D 250 SPEED Monolight User Manual
Page 23
User Manual Expert D 250 Speed / D 500 / D 1000
Hensel-Visit GmbH & Co. KG
23
Protection of the flash tube during
transport
To remove the foam, pull it
straight over the flash tube.
Inserting Halogen Lamp for Modeling Light
Before replacing the halogen lamp, switch off the unit and dis-
connect it from its power supply.
The modeling light has to match the voltage of the power supply.
Halogen lamp
Pins
Unpack the halogen lamp.
Check the halogen lamp for
obvious cracks in the glass.