Hensel Expert D 250 SPEED Monolight - Manual (Page 51)

User Manual Expert D 250 Speed / D 500 / D 1000
Hensel-Visit GmbH & Co. KG 51
Selecting Radio Channel
 Press the key RC for approx. 2
s to switch the channels of the
radio receiver.
 The display 5 is now blinking
and shows the setting.
 Turning the rotary switch
within 3 s lets you set the
desired channel.
 Approximately 3 s after a key
was last pressed, the channel
is saved and the display stops
blinking.
After the channel „H.C1“come the channels „H.C2“and „H.C3“of Strobe
Wizard Plus, directly after them the channels „H.F1“, „H.F2“ and „H.F3“
of the freemask receiver.