Deactivate pm mode – Hensel Expert D 250 SPEED Monolight User Manual
Page 54
User Manual Expert D 250 Speed / D 500 / D 1000
54
HENSEL-VISIT GmbH & Co. KG
Indicator
Display
The selected flash output and
„bat.“ blink alternately in the
display. Additionally, the indicator
LED above the key FULL blinks.
The Expert D compact flash units stay in this mode once it is activated,
even after they are switched off. No damage occurs if the Expert D are
operated on a normal power supply when in Power Max mode
Deactivate PM Mode
Key SLAVE
Press the key SLAVE until you
hear a beep tone.
The PM mode is deactivated.