Hensel Expert D 250 SPEED Monolight - Manual (Page 33)

User Manual Expert D 250 Speed / D 500 / D 1000
Hensel-Visit GmbH & Co. KG 33
Mounting to Ceiling or Pantograph
WARNING Danger from falling objects
The fastening of ceiling mounted flash units can come
loose and equipment could fall down.
 Use an additional safety screw on the tilting
bracket.
 Use a safety rope for additional protection.
WARNING Danger of bruising
When opening the locking screw of the tilting bracket
you are in danger of bruising your hands and fingers.
 When opening the screw of the tilting bracket,
hold the flash unit with the other hand to avert
unwanted motion.
The flash unit can be attached to a stand mounting or pantograph via the
tilting bracket. The tilting bracket allows the rotation of the flash unit of
360° and a tilting angle of approximately 180°.
Secure the equipment with a back-up support when attaching it to ceilings
or pantographs. Use the tilting bracket’s safety screw and secure the
device additionally with a safety rope.
Suitable safety ropes can be purchased from Hensel-Visit, see
„Accessories“ and www.hensel.de.