Risk of burns from reflector and flash unit – Hensel Expert D 250 SPEED Monolight User Manual
Page 7
User Manual Expert D 250 Speed / D 500 / D 1000
HENSEL-VISIT GmbH & Co. KG
7
Immediately disconnect the flash head from the generator if the
flash tube becomes damaged. Electrodes carry high voltage!
Flash tubes must only be changed by authorized and trained
personnel.
The flash tube must only be changed after the device is
disconnected from the power supply and is completely discharged.
Risk of Burns from Reflector and Flash Unit
After flashing there is a risk of burns caused by the reflector and the flash
unit due to hot parts on the housing or infrared heat radiation.