Removing a reflector – Hensel Expert D 250 SPEED Monolight User Manual
Page 40

User Manual Expert D 250 Speed / D 500 / D 1000
40
HENSEL-VISIT GmbH & Co. KG
Removing a Reflector
CAUTION
Risk of burns from reflector and flash unit
Heat which may cause burns develops at the head
during the flash process.
Before removing the reflector allow reflector
and flash unit to cool-off.
Allow flash unit to cool off.
CAUTION
Glass safety dome may get damaged
When mounting a reflector the glass safety dome can
be damaged.
Do not touch the glass safety dome with the
reflector.
While mounting a reflector place the flash unit
on a stand.
Place the reflector evenly on the flash unit.
When mounting a reflector hold it with one
hand.
Lever of the reflector holder
Reflector
Hold the reflector with one
hand.
With the other hand, press
the locking mechanism of
the reflector holder against
the spring tension until
reaching the end stop.