Modeling light, Mode full – Hensel Expert D 250 SPEED Monolight User Manual
Page 42
User Manual Expert D 250 Speed / D 500 / D 1000
42
HENSEL-VISIT GmbH & Co. KG
Modeling Light
The modeling light is switched on by using the key FULL or PROP:
Mode FULL:
The modeling light is set at full power.
Mode PROP:
The light output (brightness) of the modeling light is
proportional to the flash output.
Mode FULL
The modeling light is set at full power, independent of the flash output.
Key FULL
Press the key FULL, to turn
the modeling light to full
power.
The indicator above the key
turns green.