Mounting a reflector – Hensel Expert D 250 SPEED Monolight User Manual
Page 38

User Manual Expert D 250 Speed / D 500 / D 1000
38
HENSEL-VISIT GmbH & Co. KG
Mounting a Reflector
CAUTION
Risk of burns from reflector and flash unit
Heat which may cause burns develops at the head
during the flash process.
Before removing the reflector allow reflector
and flash unit to cool-off.
Allow flash unit to cool off.
CAUTION
Glass safety dome may get damaged
When mounting a reflector the glass safety dome can
be damaged.
Do not touch the glass safety dome with the
reflector.
While mounting a reflector place the flash unit
on a stand.
Place the reflector evenly on the flash unit.
When mounting a reflector hold it with one
hand.
CAUTION
The system may become damaged if external
products are used.
The system may become damaged when components
are changed or accessories are connected.
Only use original parts and HENSEL-VISIT
accessories.