beautypg.com

Operator’s manual – Great Plains DICKEY-john Seed Manager SE Operator Manual User Manual

Page 50

background image

OPERATOR’S MANUAL

Seed Manager SE

11001-1359A-200810

48 / OPERATION

SEED SPACING

Seed Spacing is the calculated average spacing between seeds in the
furrow in inches (centimeters). The resolution is in 0.1 inches (centimeters).
This function is selected by pressing the OPERATE 1 switch until the
SPACING message appears on the display. The Seed Spacing display has
several different modes based upon the Setup configuration and the scan
mode that is selected, and they are the same modes as in the Population
function. (

Figure 56

) shows an implement average seed spacing of 2.3

inches between seeds.

Figure 56
Seed Spacing Average Display

GROUND SPEED

This is the ground speed in MPH (Km/h), with 0.1 resolution, as measured
by the ground speed sensor. This function is selected by pressing the
OPERATE 1 switch until the SPEED message appears on the display. The
ground speed sensor can be either radar, Hall Effect, or reluctance type.
(

Figure 57

) shows a ground speed of 5.6 MPH.

Figure 57
Ground Speed Display