Great Plains DICKEY-john Seed Manager SE Operator Manual - Manual (Page 45)

OPERATOR’S MANUAL
Seed Manager SE
11001-1359A-200810
STARTUP / 43
Flash Version Number
DICKEY-john’s Service Department may require the four (4) different 4-digit
numbers (to identify the “flash memory” software version) if a field problem
occurs.
The first 4-digit number shows on the upper numeric display at the same
time an “F1” identifier appears on the lower numeric display. Record this
number, then press and release the SELECT switch to step to the “F2”,
“F3”, and “Fc” numbers, recording each 4-digit number along with its
identifier. To return to “F1” again press the SELECT switch. Press SETUP
to advance to the next constant. (
Figure 50 ) shows “12bE” for “Fc”, the first
Boot Version Number.
Figure 50
Flash Version Number Display