HT instruments GEO416 - Manual (Page 19)

GEO416 - GEO416GS
EN - 18
3.
Press the CLR key, the
instrument displays a screen
similar to the one beside
First and last memory
location to be cancelled
and confirmation required
Alternatively:
4.
Confirm cancellation of measurements pressing ENTER key, the
instrument emits a double sound tone confirming cancellation of the
selected measurements
Or:
4. Press ESC key to go back to previous screen
5.3. HOW TO RECALL A MEASUREMENT
1.
Press the RCL key, the
instrument displays a screen
similar to the one beside
Number of the last memory
location
Values of L and P
parameters
2.
Press the arrow keys ,  to
select the memory location
whose content is to be
displayed
Number of the memory
location whose content is
to be displayed
Values of L and P
parameters
3.
Press the ENTER key to display
the measurement stored inside
the selected memory location,
the instrument displays a
screen similar to the one beside
Measurement stored in the
selected memory location
Values of interfering
voltage at measurement
4.
Press the ESC key to go back to previous screen and press the ESC key
again to exit the memory management