HT instruments GEO416 - Manual (Page 18)

GEO416 - GEO416GS
EN - 17
5. MANAGEMENT OF STORED DATA
5.1. HOW TO SAVE A MEASUREMENT
1.
After taking a measurement
press SAVE key, the instrument
displays a screen similar to the
one beside
No. of memory location
where the measurement
has to be saved
Last value set for
parameters L and P
2.
Should you need to modify the values of the parameters L and P press the
arrow keys ,  and select L or P, then pressing the arrow keys ,  set
the desired value (from 1 to 255). These values can enable you to trace back
the place where the measurement was effected
3. OR
Confirm measurement storing pressing SAVE key or ENTER
key
5.2. HOW TO CANCEL ONE OR SEVERAL MEASUREMENTS
1.
Press RCL key, the instrument
displays a screen similar to the
one beside
Number of the last memory
location used
Values of L and P
parameters
2.
Press the arrow keys ,  to
select the memory location
where cancellation of data is to
be started , the displays a
screen similar to the one beside
Number of the memory
location where cancellation
is to be started
Values of L and P
parameters
CAUTION
Confirming cancellation of data causes removal of all stored data starting from
the selected location till the last memory location