FEC AFC1200 - Manual (Page 8)

)(& ,QF
4. Cursor movements: The
[←] [→]
keys are used to select the functions from the menu
bar. After selecting (highlighting) an item, depress the
[↵]
key to activate the function. Use of
the
[↑] [↓]
and
[←] [→]
keys may be required to further select the desired operation or
value. These four arrow keys are used throughout the AFC1200 program to provide up, down,
left and right cursor movement. Additionally, the
[↑] [↓]
keys are sometimes used to scroll
through selectable data.
5. Screen scrolling function: A scrolling function is available for use with screens that cannot
display all of the applicable data simultaneously. To scroll, select the applicable UP, DOWN,
LEFT, or RIGHT option from the menu bar and depress the
[↵]
key.
6. Print function: All AFC1200 System screen displays can be printed to the System's
Centronics parallel port by selecting PRINT from the menu bar followed by the
[↵]
key. The
screen will be printed as displayed on the monitor along with a date and time stamp and a
Machine Address identifier on the top of the page.
For the Fastening Data and the Data Store
Screen the Print function prints a hard copy of the whole set of pages. It is not required to
scroll all the pages containing the selected items.
7. Directory selection: The Directory that is currently active on the File Utility screen will be the
active directory for Preset File Utility operations. The Data File Utility screen will always refer
to the root directory. On both the Data File Utility and Preset File Utility screens, an additional
directory (path) may be selected.
8. Screen saver: The System will maintain the currently-selected screen until another is
selected or until the screen saver is automatically activated. After the screen saver is
activated, the System will default to the Fastening Data screen.
Chapter 7: System Operation
Page 7-8