FEC AFC1200 - Manual (Page 72)

)(& ,QF
7.10 Machine Configuration
The function of this screen is to preset basic identification data related to each machine.
7.10.1 TABLE OF CONTENTS
7.10.1. TABLe of Contents for MACHINE CONFIGuration screens
7.10.2. SCREen Explanation
7.10.3. SCreen OPERATION/PRINT FUNCTION
7.10.2 SCREEN EXPLANATION
2-1. The MACHINE CONFIGURation screen is used to set basic identification information
about the machine, fastening dimensions, cycle counting method, screen saver
enable, start input type and identification information.
2-2. THE screen uses the normal
[↑] [↓]
and
[←] [→]
keys and an alphanumeric
pulldown menu to input the identification data.
2-3. THe AFC1200 System is capable of running up to 24 spindles at once with the
flexibility of dividing the 24 into four (4) separate heads. THe heads are designated
(A), (B), (C) AND (D). EACh machine and each head in the machine, may have its
own particular address which is composed of any combination of letters, numbers
and symbols from the alphanumeric pulldown menu (max. 20 characters).
FIG. 7-10-2 machine configuration screen
Chapter 7: System Operation
Page 7-72