GxT Ferret 54 ENGINE DIAGNOSTIC CENTER - Manual (Page 49)

Results are displayed on this screen:
STARTING/CHARGING HISTORY
Cranking 225 RPM Cranking 10.23 Volt
Alternator 45 Amps Cranking 134 Amp
Recovery 2 Sec. Battery 451 CCA
4-20
VOLT AMP METER
Press ELECTRICAL, SELECT Volt Amp Meter , and press NEXT.
Amps are measured by the Inductive Amp Probe. Battery voltage is measured at the Battery
Power Clips. Auxiliary volts are read with the Auxiliary Meter Lead and referenced to either
Battery Power Clip. Press SELECT to change the reference between POS and NEG. Large
digits are displayed for enhanced readability.
бс гу âòAmp бс ащ жц åõBatt
БС ГУ ВТ БС АХ.ЖЦ ЕХ
ащ ащ ащ àùAux Ref иш гу éùRPM
АХ АХ.АХ ÀÕto NEG~ ИШ ГУ ЙЩ
DISCHARGE
15 SECONDS
RECOVERY
TIME
CHARGING
MEASUREMENT
CRANKING
VOLTS
CHARGING
AMPS
14V
12V
10V
OPERATOR
ACTIVITY
CHARGE
DISCHARGE
VOLTS
WAIT
FOR
BATTERY
RUN
ENGINE
CRANK
ENGINE
CRANKING AMPS
STARTING / CHARGING HISTORY