GxT Ferret 54 ENGINE DIAGNOSTIC CENTER User Manual
Page 27
Diagnostic Center Setup
The
Diagnostic Center Setup
provides the Diagnostic Center with information it needs to
properly display and print information
LCD Contrast
Choose from four levels of display contrast
for best viewing. Contrast choice may vary
with lighting and temperature.
Print Contrast
Thermal printer paper is available in a variety
of sensitivities. Some types of calculator
paper require more heat to make a dot. A
higher number works best in such a case.
Others, similar to fax machine papers,
require much less heat to leave a mark.
Smearing will occur if too high a setting is
selected.
Custom Header
Instructions for setting a custom header
appear on the next page.
Messages
Choose whether the Diagnostic Center
displays standard or short messages. Select
YES
while becoming familiar with the
Diagnostic Center.
Setup Default
This option allows the most frequently used
engine setup to be saved in permanent
memory. The saved setup will be loaded
whenever power is applied to the Diagnostic
Center.
Date & Time
Use the SELECT keys and press NEXT to
alter the date and time. The digits will begin
blinking. Use the SELECT keys to change
the number. Press NEXT to set. The
SELECT keys may be held to rapidly move
through the numbers.
Temperature
°
C /
°
F
Select whether temperature is displayed in
Fahrenheit or Celsius degrees.
System Diagnostics
Built-in tests allow you to check the operation
of various test leads. Select the lead to be
tested and follow the screen instructions.
3-4
Program Cartridges
This selection accesses installed Program
Cartridges. Each Program Cartridge will have
its own help screens and messages.
If two Program Cartridges are installed, a
menu will appear giving the name of each
cartridge. SELECT a cartridge, then press
NEXT.
The menu from the chosen cartridge is
presented. Use the SELECT and NEXT keys
to enter a test.
Gas Detector Service
The choices available under this heading are
described in the MAINTENANCE section of
this manual.