GxT Ferret 54 ENGINE DIAGNOSTIC CENTER - Manual (Page 10)

STAND
The Diagnostic Center's Control Module may
be hung on the stand at any of four positions
on the top and front of the columns.
When fully closed, the drawer has a gripping
mechanism that reduces the chance of
opening while the stand is being moved.
Ample room is given for operators manual
and supplies such as printer paper,
replacement filters and leak test cap.
An adjustable boom is provided for lead
management. The boom may be mounted on
either side of the stand and has convenient
clip bars for lead storage. There are also
hooks on the rear of the stand for hanging
the emissions Sample Hose Assembly.
Inside the magnetically latched door are the
Calibration Gas bottle compartment and the
Gas Detector shelf. The Gas Detector cable
can be routed inside either column and out
through a hole above the Gas Detector shelf.
1-5
The Control Module may be mounted in any
of four positions.