Ohaus NBF1A2 Navigator Balances - Manual (Page 78)

15
TM
®
Print
Mode
Setup
Units
TM
Enter
On/Off
G/N/T
Zero Tare
3.8 Printing Data
Printing data to an external computer or printer requires that the communications parameters in the Setup menu,
print options and communication parameters be set first. Refer to paragraph 4.5 for Print menu settings and para-
graph 4.6 for RS232 communication settings.
Procedure
• Press the Print button. Printing to an external printer
or computer will occur each time the Print button is
pressed unless the autoprint feature is turned on in
which case, printing can occur in a continuous fash-
ion, at specified intervals or each time a stable read-
ing is achieved.
Sample printout is shown below with time turned on.
SAMPLE PRINTOUT
For a review of of printing samples, refer to Section 4
Setting Up Your Balance. What is printed is controlled
by the GLP Set Menu and the selection of GLP
Continous or GLP Tare in the Print Menu.
12/01/99 12:01:37 AM
429.5 g B/G
Stable
g
B/G