Overview of controls – Ohaus NBF1A2 Navigator Balances User Manual
Page 64
1
TM
®
Mode
Setup
Units
TM
Enter
On/Off
G/N/T
Zero
Tare
OVERVIEW OF CONTROLS
1
3
4
2
5
6
8
9
10
7
No. Designation
Function
1
I On/Off button
Power on/off button.
2
Mode button
Selects standard weighing, percent, parts counting, and checkweighing modes.
3
Units button
Selects weighing units.
4
Setup button
Selects various menus: calibration, date, time, readout, GLP data, GLP set, print,
RS232, mode, units, global, custom and auto shut-off.
5
Tare button
When pressed, performs tare function. When pressed again, clears tare.
6
button
When pressed, travels up through menus.
7
button
When pressed, travels to the left through menus.
8
button
When pressed, travels to the right through menus.
9
G/N/T button
When pressed during setup, travels down through the menus.
When pressed following Tare entry, alternates through Gross, Net and Tare weight on
the display and operates in the normal weigh mode.
10
Enter/Print button
When in menus, selects item on display, otherwise prints data.
11
Leveling indicator
Indicates leveling position of the balance.
12
Zero button
When pressed, zero's the display. (Non functional when Tare is activated.)
1
11
®
Mode
Setup
Units
Enter
Stable
Center
of Zero
g
On/Off
TM
G/N/T
Zero
Tare
B/G
12
Stable
Mode
Units
Setup
Custom
Use keys to change,
B/G
NET
Center
of Zero
PC GN
l bo zcti
press Enter
mg k g
Change
%dwt