Ohaus NBF1A2 Navigator Balances - Manual (Page 88)

25
TM
®
Print
Mode
Setup
Units
TM
Enter
On/Off
G/N/T
Zero Tare
4.10 Auto Shut-Off
An energy saver is incorporated in the balance to prolong battery life and to conserve ac power. A built-in timer in the
balance can be set from 1 to 60 minutes. If the balance is not used or disturbed during the entire timer period, the
balance will shut off after the specified set time. A setting of zero allows continuous battery operation of the balance.
The default setting of the timer is 0. To set a specific time, proceed as follows:
Procedure
• Press the Setup button, CAL is displayed.
• Press button until AUTOFF is displayed.
• Press Enter button, TIMER is displayed.
• Press Enter button, if a 0 appears, the timer is dis-
abled. If a number other than 0 appears, it indicates
the timer period which was previously set.
• To change the number of minutes the timer is to be
ON, press or button, then press Enter
button. SAVED is momentarily displayed followed by
LOCK.
• Press Enter button.
• Select ON or OFF by pressing or button,
then press Enter button.
• EXIT is displayed, press Enter button to save setting.
Balance returns to weighing mode.
Setup
Use keys to change, press Enter
Change
Setup
Use keys to change, press Enter
Change
Setup
Use keys to change, press Enter
Change
Setup
Use keys to change, press Enter
Change
Setup
Use keys to change, press Enter
Change