I-Data 5250 ALLY - Manual (Page 65)

Page 2-19 CHAPTER 2 — ADVANCED CONFIGURATION
Has
System Specifically
Requested Landscape,
Portrait or COR?
Use System-
Requested
Orientation.
Yes
What Is The Setting
Of Option 54?
Use Setting of
Paper Drawers
as Orientation.
(Force Portrait
by default.)
01 (Drawer)
No (Or System
Requests Default)
Will
System-Requested
Page Size Fit On Paper In
Current Drawer?
00 (Auto)
No
Is
System-Requested
Height > System-Requested
Width?
Use Portrait
Orientation.
Yes
Yes
Use Landscape
Orientation.
No
Calculate Page Orientation
System page size is calculated as:
Columns (MPP) x CPI = width in inches,
Lines (MPL) x LPI = length in inches.
Physical paper width and height are
determined by the settings of the
individual paper drawer.
The 5250 ALLY supports only portrait,
landscape and COR (Computer Output
Reduction) orientations; it does not
support “reverse” portrait or landscape
orientations. Rotations of 0 or 180
degrees are both portrait. Rotations of
90 or 270 degrees are both landscape.
Is the Setting of
Option 54 = 02, 03 or 04?
Use Orientation
Specified
Regardless of
System
Requests.
Yes
The 02 (portrait), 03 (landscape) and 04
(COR) options allow overriding of all
system orientation requests.
No
When automatically orienting, pages
that are taller than wide are printed in
portrait orientation, and pages that are
wider than tall are printed in landscape
orientation.
Use Setting of
Paper Drawers
as Orientation.
(Force Portrait
by default.)