I-Data 5250 ALLY - Manual (Page 25)

Page 1-3 CHAPTER 1 — GETTING STARTED
Selecting a Location
The compact size, quiet operation and attractive styling of the 5250 ALLY
allow it to be placed in almost any location with a flat, stable surface. For
ease of operation and servicing, it is recommended that it be installed near
the printer. If the printer has a large enough flat surface, the 5250 ALLY
may be placed there for convenience.
Space Requirements
The dimensions of the 5250 ALLY are as follows:
5250
ALLY TM
MODE
Electrical Requirements
The 5250 ALLY requires 5 VDC at 1 amp provided by the 110 VAC
adapter, or 5 VDC at 1.5 amps provided by an optional 220 VAC adapter.
Users with any questions regarding the electrical service at their site
should contact a qualified, licensed electrician.
Operating Environment
The 5250 ALLY operates best in an environment with a temperature
between 50° and 90° Fahrenheit (10°-32° Celsius) and a relative humidity
between 15% and 65%. It should be located in a well-ventilated area away
from direct sunlight and sources of heat, cold or humidity.