I-Data 5250 ALLY - Manual (Page 221)

Page B-39 APPENDIX B — SCS/DCA COMMAND SUMMARY
The printing mechanism of the 4214 prints characters
only as 8
x
10. If character bit image information is
loaded with 8
x
9 mode (mm=01h), the 9th slice of the
image is automatically copied into the 10th slice, to
expand the character width to 10 slices.
The 5225 is not capable of printing solid black areas for
more than 5 minutes. Permanent damage to the 5225 may
result if the printer is made to print solid black areas for
more than 5 minutes. IBM suggests that after high-
density printing on the 5225, the printer is allowed to
cool down (no printing) for 10 minutes.
IBMEMUL: No operation.
275EMUL: No operation.
Command: Bell (BEL)
Format: 2F
Printers: 3812, 4214, 5219, 5224, 5225, 5226
Action: Sounds an audible alarm and causes the printer to stop
and wait for operator intervention.
IBMEMUL: No operation.
275EMUL: Sends BEL to printer.
Command: Index Return (IRT)
Format: 33
Printer: 3812, 5219
Action: Same function as Required New Line (RNL).
IBMEMUL: Same as IBM.
275EMUL: No operation.