I-Data 5250 ALLY - Manual (Page 225)

Page B-43 APPENDIX B — SCS/DCA COMMAND SUMMARY
Command: Subscript (SBS)
Format: 38
Printer: 3812, 5219
Action: Causes the current print position to move down one-half
line distance.
On the 5219, only one level of superscript is supported.
On the 3812, multiple levels of superscript are supported.
IBMEMUL: Same as the 3812.
PFS 2B —SUBS ON is sent to the printer once for each
subscript level. A subscript command received after a
superscript command (to restore the normal baseline
position) causes PFS 2C —SUBSOFF to be sent to the
printer once per level.
The use of Subscript On/Off and Superscript On/Off
printer commands in PFSs 2B —SUBS ON, 2C —
SUBSOFF, 2D —SUPS ON and 2E —SUPSOFF,
respectively, will allow only one level of sub/
superscripting, because the target printer is performing
the sub/superscript, and it will support only a single
level.
The use of relative downward/upward movement
commands for PFSs 2B —SUBS ON, 2C —SUBSOFF,
2D —SUPS ON and 2E —SUPSOFF, respectively, will
allow multiple sub/superscript levels to be supported.
275EMUL: No operation.
Command: Indent Tab (IT)
Format: 39
Printers: 3812, 5219
Action: Moves the print position to the right one Tab stop and
sets the effective left margin to this position. If no Tab
stop is encountered, it will move the print position one
Space to the right.
IBMEMUL: Same as IBM.
275EMUL: No operation.