HP B180L User Manual
Page 200
186
SCSI Connections
Assigning SCSI Device IDs
5
Write in the SCSI device ID of any internal drives in Table 25.
6
Write in the type of external single-ended drives currently connected to your
workstation under the heading “External Device Drives” and each drive’s SCSI
device ID under the heading “Device ID.”
7
Add your new drive to the table if it is an external device. If it is an internal drive,
continue to Step 8.
Table 25
Single-Ended SCSI Device IDs
SCSI Device Drives
Internal Device ID
(Address) Number
(Only 0 through 6
Available)
External Device ID
(Address) Number
(Only 0 through 6
Available)
Internal System Drives:
System SCSI Drive(s)
____________________
____________________
CD-ROM Drive (if present, uses ID
No.2)
____________________
N/A
4-mm DDS Tape Drive
(if present, uses ID No.1)
____________________
N/A
External Device Drives
N/A
____________________
1st __________________________
N/A
____________________
2nd __________________________
N/A
____________________
3rd __________________________
N/A
____________________
4th ___________________________
N/A
____________________
5th ___________________________
N/A
____________________
6th __________________________
N/A
____________________
7th __________________________
N/A
____________________
NOTICE: You can have no more than 7 single-ended SCSI devices (internal and external) con-
nected to the system.