HP B180L - Manual (Page 183)

169
Changing Your Workstation’s Hardware Configuration
Changing Your Monitor Type
The system queries you to save the new monitor type. If the monitor type
displayed is correct, press Y to save this monitor type.
MONITOR INFORMATION
Path Slot Head Type Size Freq Class
---- ---- ---- ---- --------- ---- -----
GRAPHICS(0) 0 1 12 1280x1024 72Hz
This is type 12 of 15 types.
Press [RETURN] to select this monitor type:
Press [y] to save this monitor type:
If this is not the correct monitor type, press any other key to continue the
search.
Changing the Console to External Terminal
In the event that your console stops displaying to your graphics device, use
the following procedure to display to console to an external terminal:
1 Turn system power off.
2 Disconnect the PC keyboard connector from the system rear panel.
3 Connect a serial terminal to the Serial 1 connector (the top serial connector) on
the system rear panel.
4 Power on the system.
The system will now display the console to the terminal connected to the
Serial 1 port.