HP B180L User Manual
Page 103
89
Solving Problems
Running System Verification Tests
1
At a command line prompt, enter the following:
cstm
The following message appears:
Support Tool Manager Version A.01.00
Type ‘help’ for a list of available commands.
CSTM>
2
At the
CSTM>
prompt, you can enter several commands. To see what commands
are available, type the help command.
3
To verify the system operation, type the following at the
CSTM>
prompt:
CSTM>
verify all
Messages similar to the following appear:
Verification has started on device (CPU).
Verification has started on device (FPU).
CSTM>Verification of (FPU) has completed.
CSTM>Verification of (CPU) has completed.
4
Press
Enter
to return to the
CSTM>
prompt after all test results are reported.
5
To exit the Support Tools Manager, enter the following:
CSTM>
exit
If any tests failed, further diagnosis is necessary by qualified service personnel.
Contact your designated service representative.