beautypg.com

HP B180L User Manual

Page 170

background image

156

Changing Your Workstation’s Hardware Configuration

Replacing the Battery

3

Disconnect the cables from the system board and the optional fast, wide SCSI
adapter, as shown in Figure 58.

When disconnecting the floppy cable use the following procedure:

a

Lift the locking ring on the connector to the up, or unlocked position.

b

While holding the locking ring in the unlocked position, pull the cable out of
the connector.

4

Remove the storage tray retaining screw, as shown in Figure 58.

Figure 58

Disconnecting the Storage Tray Assembly

Floppy Connector

SESCSI

Storage Tray

CD Audio

Power

FWSCSI

This manual is related to the following products: