Hitachi 8450H/R User Manual
Page 86
Ch 3: Installing Optional Devices
82
Hitachi PC VisionBase 8450H/R Server
Installing Processors
This section explains how to install processors in processor slot 2.
NOTE: This section assumes that a processor has already been installed in processor slot 1. Install processors in
processor slots 3 and 4 in the same way.
Install terminators for processor in the same way as for processors.
1.
Disengage the claw of the cover for processor slot 2, then open the processor slot.
2.
Remove the terminator for processor from processor slot 2.
Opening the two levers at the same time will release the terminator from the connector. Then hold and extract
the terminator.