Hitachi 8450H/R - Manual (Page 117)

Ch 4: System Environment Settings
Hitachi PC VisionBase 8450H/R Server 113
Returning the SCSI Utility Settings to Defaults
Referring to “Restore Default Setup” on page 102, return the settings of each screen to defaults.
List of Utility Settings
The tables below show setting values of the Setup Menu, the SSU, and the SCSI Utility at the time of shipment.
Be sure to check each of the settings because the Setup Menu, the SSU, and the SCSI Utility contain setting items
that need to be changed after defaults are loaded (such items are enclosed in
). For the meaning of each item,
see the relevant chapter.
Setup Menu
After returning the setting to defaults, you need to set each item once again.
Item Hitachi PC VisionBase 8450H/R
Server Setting Values
Main Menu
System Time: To be set by the user
System Date: To be set by the user
Legacy Diskette A: 1.44/1.25MB 3½"
Legacy Diskette B: Disabled
Hard Disk Pre-Delay Disabled
Primary Master [None]ÅAPrimary Slave [None]
Type: Auto
Multi-Sector Transfers: Disabled
LBA Mode Control: Disabled
32 Bit I/O: Disabled
Transfer Mode: Standard
Ultra DMA Mode: Disabled
Keyboard Features
Numlock: On
Key Click: Disabled
Keyboard auto-repeat rate: 30/sec
Keyboard auto-repeat delay: 1/2sec
Processor Information
Processor X Stepping ID: No
Processor X L2 Cache Size: Depends on the processor
Language: English (US)