Panasonic KX-TD500 User Manual
Page 95
System
Programming Guide
95
Parameter
7. Checking dial *, # by toll restriction
Default
Check
Value Range
1.
No check [Disable]
2.
Check [Enable]
Description/Function
Specifies whether or not the system checks the user-dialled " " and
"#" during Toll Restriction procedure.
Note
•
This assignment is required for certain Central Offices (COs)
to prevent toll fraud.
Some Central Offices ignore the user-dialled " " and "#." If
your CO is such a type, select "No check."
Reference
• 1.6 Originating Features (F/G)
– Toll Restriction for Special Carrier Access
Parameter
8. Confirmation tone for Override, Barge-in,
Conference and Privacy Release
Default
Enable
Value Range
1.
Enable
2.
Disable
Description/Function
Allows you to remove Confirmation Tone 4.
This tone is sent when a three-party conference is established /
finished.
Reference
• 1.13 Audible Tone Features (F/G)
– Confirmation Tones
Parameter
9. Confirmation tone for Call Pickup, Paging, Paging-
Answer, TAFAS-Answer, Hold Retrieve and
Call Park Retrieve
Default
Enable
Value Range
1.
Enable
2.
Disable
Description/Function
Allows you to remove Confirmation Tone 3.
This tone is sent when a conversation is established just after an
extension user dials the feature number for accessing the following
features: Call Pickup, Paging, Paging – Answer, TAFAS – Answer,
Hold Retrieve and Call Park Retrieve.
Reference
• 1.13 Audible Tone Features (F/G)
– Confirmation Tones