Panasonic KX-TD500 - Manual (Page 126)

Group
126 Programming Guide
Parameter Intercept Destination – Day / Night
Default Blank
Value Range 3-4 digits consisting of 0-9
Description/Function Specifies the destination extension (3 or 4 digits) for Intercept
Routing feature in both Day and Night modes respectively.
Notes
• Intercept Routing provides an automatic re-direction of calls
that have not been answered.
• There are six possible destinations of intercepted call:
(1) An extension, (2) an external pager (TAFAS),
(3) an OGM group, (4) an extension group,
(5) an incoming group, or (6) a phantom extension.
Reference • 1.11 Transferring Features (F/G)
– Intercept Routing
Parameter Pause Time before Flash Signal
Default 512 ms
Value Range 1. None
2. 512 ms
3. 1024 ms
4. 1536 ms
5. 2048 ms
Description/Function Specifies the pausing time required before sending the Flash
Signal.
Reference None
Parameter Max. Dial No. after EFA Signal
Default 0
Value Range 0-32
Description/Function Specifies the maximum dialling digits allowed after sending EFA
(External Feature Access) signal.
Note
• If set to "0," the dialling digits can be sent without limit.
Reference • 1.12 Conversation Features (F/G)
– External Feature Access
• 2.8.2 If a Host PBX is Connected (U/M)