Panasonic KX-TD500 - Manual (Page 374)

Default Values
374 Programming Guide
[DDI / DID / TIE] Number to be added Blank
Digit to receive DDI / DID 4 (DID / DID-2W / DID-MFC / E1[DR2] / T1[DID]
card), 16 (BRI / PRI23 / PRI30 card)
Collect Call Enable
Wink Signal Time-out 1024 ms
Start Signal Type Wink
Answer Wait Timer None
[CPC Signal] OUT Detection Enable: DID / DID-2W / DID-MFC / E1 [DR2] card,
Disable: ELCOT / GCOT / LCOT / PCOT / RCOT /
T1 [GCO] / T1 [LCO] card
[CPC Signal] OUT Detection - Detection Time
(Type A) 400 ms: [NZ], None: Others
[CPC Signal] OUT Detection - Detection Time
(Type B) 160 ms
[CPC Signal] IN Detection [NZ]: Enable, Others (Enable: DID / DID-2W / DID-
MFC / E1 [DR2] card, Disable: ELCOT / GCOT /
LCOT / PCOT / RCOT / T1 [GCO] / T1 [LCO] card)
[CPC Signal] IN Detection - Detection Time
(Type A) 400 ms: [NZ], None: Others
[CPC Signal] IN Detection - Detection Time
(Type B) 160 ms
[TIE Line] Type 4 wires
[TIE Line] Sensitivity - IN EXT 0 dB
[TIE Line] Sensitivity - IN CO 0 dB
[TIE Line] Sensitivity - OUT EXT 0 dB
[TIE Line] Sensitivity - OUT CO 0 dB
[TIE Line] Sending TIE Caller ID No
[TIE Line] TIE-to-CO Security Mode No
First Ring Delay Timer 0 s
Reverse Signal Detection Enable: [NZ], Disable: Others
Programme Default