Panasonic KX-TD500 - Manual (Page 63)

System
Programming Guide 63
Parameter 73 Remote FWD Cancel-Once
Default 723
Value Range 1-4 digits consisting of 0-9, or #
Description/Function With this feature number, the Manager or the Operators can reach
an extension that has set Call Forwarding. It is one time ("once")
cancellation, not a permanent cancellation of Call Forwarding on
the destination. [For Manager, Operator only]
Reference • 3.1.3 Calling the Extension that has set Call Forwarding (Remote
FWD Cancel—Once) (U/M)
Parameter 74 Trunk Route Control
Default 724
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for Trunk Route Control.
[For Manager, Operator only]
Reference • 3.2.4 Trunk Route Control (U/M)
Parameter 75 UCD Monitor Mode
Default 725
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for UCD Monitor mode. One
supervisor can be assigned per UCD Group. The supervisor can
monitor the number of calls in the waiting queue.
Reference • 2.11.3 Monitoring the Number of UCD Calls Waiting to be
Answered (UCD Monitor Mode) (U/M)
Parameter 76 TIE Line Access
Default 77
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for making a TIE line call.
Reference • 3.1 TIE Line Features (F/G)
– TIE Line Service