Panasonic KX-TD500 - Manual (Page 65)

System
Programming Guide 65
Parameter 96 CLIP / COLP
Default 711
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for selecting a CLIP / COLP (Calling
/ Connected Line Identification Presentation) number for an
outside line or an extension.
Reference • 2.7.5 Displaying Your Number on the Called Party and Calling
Party's Telephone (Calling/Connected Line Identification
Presentation [CLIP/COLP]) (U/M)
Parameter 97 CLIR
Default 59
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for turning on / off the CLIR (Calling
Line Identification Restriction) feature.
Reference • 2.7.6 Preventing Your Number Being Displayed on the Called
Party's Telephone (Calling Line Identification Restriction [CLIR])
(U/M)
Parameter 98 COLR
Default 58
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for turning on / off the COLR
(Connected Line Identification Restriction) feature.
Reference • 2.7.7 Preventing Your Number Being Displayed on the Called
Party's Telephone (Connected Line Identification Restriction
[COLR]) (U/M)
Parameter 99 Dial Information (CTI)
Default Blank
Value Range 1-4 digits consisting of 0-9, or #
Description/Function Specifies the feature number for sending digits to the CTI
application (usually running on a PC connected to the PBX).
Reference • 2.8.4 If CTI Service is Used (U/M)