Panasonic KX-TD500 - Manual (Page 93)

System
Programming Guide 93
Parameter 2. SLT On-hook with consulting held call
Default Consulting Hold
Value Range 1. Consulting Hold
2. Disconnect
Description/Function Specifies the result of pressing the switchhook lightly and then
replacing the handset during an outside call.
This setting applies to SLT users only.
Reference • 1.10 Holding Features (F/G)
– Consultation Hold
Parameter 3. FLASH button operation while CO talking
Default Release the trunk
Value Range 1. Release the trunk
2. Don't release the trunk
Description/Function Specifies the result of pressing the FLASH/RCL button on PT
during an outside call.
Reference • 1.12 Conversation Features (F/G)
– External Feature Access
Parameter 4. FLASH button operation when "Don't release
the trunk" is selected at #3
Default Disconnect and hear CO dial tone
Value Range 1. Disconnect and hear CO dial tone
2. Sending EFA signal
Description/Function Specifies the result of pressing the FLASH/RCL button on PT
during an outside call when "Don't release the trunk" is selected in
"3. FLASH button operation while CO talking."
Reference • 1.12 Conversation Features (F/G)
– External Feature Access