Panasonic KX-TD500 - Manual (Page 254)

Features
254 Programming Guide
Parameter Mode
Default Disable
Value Range 1. Enable
2. Disable
Description/Function Specifies whether Waiting Second Dial Tone mode is enabled or
not.
Note
• In some areas, upon completion of area code entry, the
extension user must ensure the reception of the second dial
tone from the Central Office before dialling the office code
and the subscriber number. In this case, this mode should be
enabled.
Reference None
Parameter [Waiting Second Dial Tone Code] Dial
Default All: Blank
Value Range Up to 4 digits consisting of 0-9 or X
Description/Function Specifies 1-4 digits facility access code required by the Central
Office.
Note
• "X" can be used as a wild card character which substitutes
any digit in its position.
Reference None
Parameter [Waiting Second Dial Tone Code] Pause
Default None
Value Range 1. None
2. 1-4
Description/Function Specifies the pause time length (fixed dialling delay) required to
ensure the reception of CO dial tone. One pause time length (1.5-
4.5 s) is determined by "Pause Time" setting in "3-1 Trunk Group"
screen (Section "3.2
Trunk Group".)
Reference None